The nearly square top with molded edge is affixed to cleat which receives the hockey stick legs that are joined by a thicker than usual disk; the returns at foot terminus may be unique. (H: 27"; top: 16 by 15.75")
A closely related table with the same scrolled tripod feet is published within Wallace Nutting's Furniture Treasury, plate 1395.
Dimensions: 27.75" H, 20.5 by 15.75" top.
The square top with shaped corners affixed to molded cleat; the baluster turned column is raised on unusual legs; the interior arch displaying height and movement. The gradually slopping upper-leg sharply descends from the knee to spurred raised feet. For those accepting of character; extremely warped top.
(H: 26.25"; top: 16 by 15.75")
Square top with rounded corners on baluster turned Colum raised on spider leg tripod base. Dry old surface; screws added to base of column to tighten shrinkage fissures. (H: 28.25"; top: 17.75 by 16.25")
The round two-board top with featuring concentric scratch-beaded edge is pegged to carved cross-cleats receiving the turned column raised on shaped slab-cut feet which are pinned to base with turned drop.
(Dimensions: 27" H, 22" top diameter.)
The circular dished top above birdcage support; cleats with shaped terminals; reeded standard featuring a suppressed and belted ball raised on tripod base; the cabriole legs ending in slipper feet retaining full pads. (H: 28"diameter: 23.25")
The nearly square top with applied molding above a full-length drawer that slides on deep cleat above the baluster turned column raised on slab-cut cabriole legs resting on pad-feet. Dimensions: 28.5" H, 18.75 by 19.25" top.
The molded octagonal top affixed to turned cleat above carved standard; above the tripod base is an acanthus carved and punch decorated urn surmounted by ring turning and gadrooning; the whole raised on cabriole legs pinched at ankle, resting on ridged feet with full pads. (H: 27.25"; top: 10 by 11.25")
A fine example featuring a figured dished top raised on elegant baluster turned standard continuing to
tripod base [cabriole legs] resting on claw and ball feet. Excellent condition, very good color and patina.
(height: 26.75"; top diameter: 23")
As depicted, a very handsome and tight serpentine top on a baluster turned column, raised on very good snake foot with pad. The surface history is intact; dry patina. Tight mended shrinkage fissure in top. (Height: 27.25"; top: 15.875 x 17.125".)
The round top above urn-turned pedestal raised on cabriole legs resting on elegant slipper feet
retaining full pads…fine condition.
(Dimensions: 27.5” high, 17.5” top diameter.)
This successfully proportioned stylish candle stand features a vibrant mahogany top with a rosewood cross-banded edge and a central flame birch panel within a geometric border. The top pivots on two mahogany batons and is secured in the horizontal position with a circular brass latch, which is original to the table. The top is raised on a ring turned post with a delicate laurel wreath carved central vase; this specific leaf decoration is a motif used by Salem carvers including Samuel McIntire. The post joins three delicate slender tapering scrolled spider legs with geometric inlaid cuffs. The table is in excellent condition with a fine old surface that may be original. A small fissure in the top has been reinforced with an inset Dutchman in the back. Mahogany with birch block and light and dark wood inlays. (Height with top up 41; dimensions of top: 22 x 14 7/8"; height with top down 29".) Mahogany with birch block and light and dark wood inlays.
The round top affixed to molded and tapered curly maple cleat on baluster turned column; raised on cabriole legs with ridge and pads. (Height: 26.5"; top diameter: 16.75")
Featuring a thin octagonal top affixed to turned cleat with threaded aperture that receives the urn-turned standard which is raised on beautiful spider-legs resting on spade feet. We note that an old shrinkage fissure following wood grain in top has been professionally repaired by the addition of a pair of delicate underside moldings. (Height: 28"; top: 14.5 x 14.75")
The pierced gallery is of dovetail joinery; pullout slide within molded case raised
on turned and tapered pedestal resting on cabriole legs terminating with pad feet. A
molded rectangular panel centers each of the legs where joining platform. (Very good
condition commensurate with age and use; height: 30.25"; top: 8.75" x 8.75")
The robust double socket candle arm travels on a turned and flaring standard contuse to a perfectly
proportioned round pedestal raised on tripod feet. Excellent condition; displays good color and patina. Height: 34.5".
The round top secured to standard by a sophisticated 3-piece “H” form cleat that is
shaped, canted, and molded. The block, baluster, and ring-turned standard pierces the
shaped cross or “X” form base featuring shoe feet. It appears that at onetime there were
pads nailed to feet that are long gone. (Height: 28"; top diameter: 18.5")
(Association made based on a group of tables with similar design features.)
Square top, having chamfered edges, top and bottom, is attached to an unusual and cleat;
rectangular molded cleat nearly wide as the top featuring a raised block at center…the short
end with gouge carving; long end with chamfered top and canted ends.
The elegant urn-turned standard continues to tripod legs [spider] resting on squared feet.
The tops of legs are faceted and display flat ridges; chamfered top-and-bottom continues to the
notched feet…the notches define the feet.
(Excellent condition with a small nail added to bottom of shaft to insure the integrity of a typical and common shrinkage fissure. Height: 29.5"; top: 14.5" x 15")
Round top with molded edge affixed to shaped cleat by clinched rosehead nails; couple screws
added from underneath later. The turned shaft continuing to octagonal terminus featuring a bell-
shaped finial ending with a small orb. Slab-cut cabriole legs resting on
slipper-like feet…one retaining projecting pad.
(Height: 29"; top diameter: 15.25")
The carved arm with two tin candle sockets and hooks for hanging tools on a spiral-carved to-round-to-square chamfered standard morticed to a heavy X-Base. A shrinkage crack was attended-to with four early square nails during its early working life. The stand, in original natural surface displays a nice surface.
This mixed wood stand features an octagonal top on turned column, raised in slightly arched cruciform base. This table with excellent surface measures 25" high, and the top measures 12 by 12".
The round top pivoting on cleats above turned standard received by chamfered octagonal platform raised on turned legs. (Height: 29.25"; top diameter: 17")
Round top joined to chamfered cleat atop tapering ring and urn-turned standard raised tripod base featuring cabriole legs having exaggerated angular knees; resting on pad feet. (H: 24"; top diameter: 17.5")
The delicate round top is fastened by the rectangular cleat with chamfered edge that receives the graceful baluster turned pedestal with a deep spool above compressed ball raised on tripod cabriole legs ending in slipper feet with full pads. The column and base are in an old red resin finish of good patina while the top looks to be natural shellac that has alligatored. (H: 26 3/8"; top measures 17.5")
The octagonal top with sharply angled undercut edge providing a crisp profile above a turned and carved urn standard raised on well arched spider-leg base.
Excellent condition. (Height: 28"; top: 23.25 x 15".)
The cut-corner top above turned column raised on tall spider legs.
Slight cupping to top; minor imperfections...easily restored.
(Height: 28"; top: 17.5 x 13.25".)
The molded top affixed to shaped cleat above beautifully turned column, raised on spider legs.
Dimensions: 28.25" height, 16.75" top diameter.
903-58 - SOLD
10 Days Before the Masses...AAAWT Advance Notice Email Program
We offer a 10 Day Early Preview to All AAAWT major Web Site Updates
including Bulk Item Adds,
Special Offerings, MAD , Man-at-Artms, and BEE Ads, plus the earliest possible pre-announcments for
Major Gallery Updates, Mass Price Reductions, Special Interest Sales. Choose from "Arms Only",
"Art and Antiques Only" or 'All Updates" Just one or two emails per month with a no-hassle Opt-Out
option with every email. When you sign up here, you will be redirected to the apprpriate Advance Email
Sign-up Confirmation Page, confirming that your entry was successful, and placing you to do some shopping! Welcome to our Advance Notice Email Program !
